Carburettor related information

  • Butterfly valve types

    Registered
    Technical Guides
    Butterfly valve types

    Butterfly valve types A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to ...

  • Carburetter (Carburetor)

    Registered
    Technical Guides

    Carburetor Explained A carburetor (American and Canadian spelling), carburator, carburettor, or carburetter (Commonwealth spelling) is a device that blends air and fuel for an ...

  • Carburetter Motorcraft 2150

    Registered
    Technical Guides
    Carburetter Motorcraft 2150

    Motorcraft 2150 carburettor The Motorcraft 2150 was a Ford (also used by AMC) 2-barrel carburetor manufactured from 1973 through 1983, based heavily on its predecessor, the ...

  • Carburetter SU

    Registered
    Technical Guides

    SU Carburettor Explained SU carburettors (named for Skinners Union, the company that produced them) were a brand of carburettor of the sidedraught constant depression type. A ...

  • Carburettor automatic choke how it works

    Technical Guides
    Carburettor automatic choke how it works

    How an Mechanical automatic carburettor choke works A mechanical automatic carburettor choke works when the engine is cold, press the accelerator pedal once before switching on ...

  • Carburettor cable lubricating controls

    Registered
    Technical Guides
    Carburettor cable lubricating controls

    Lubricating carburettor cable controls and linkages Lubricating the carburettor cable controls and linkages .The carburettor's cable controls start at the accelerator pedal. ...

  • Carburettor dashpot oil top up Guide

    Technical Guides
    Carburettor dashpot oil top up Guide

    Topping up the dashpot oil level Guide Carburettor dashpot oil top up on SU and Stromberg carburettors. Guide Tools needed Correct oil for make Rag to clean Grips if lid (screw ...

  • Carburettor Diffcult starting

    Technical Guides
    Carburettor Diffcult starting

    Difficult starting problems with Carburettor Often with cars fitted with a Carburettor, problems can be easily solved here we explained problems and how to find and fix them. 10 ...

  • Carburettor heat

    Registered
    Technical Guides
    Carburettor heat

    Carburettor heat Carburetor, carburettor, carburator, carburettor heat (usually abbreviated to 'carb heat') is a system used in automobile and piston-powered light aircraft ...

  • Carburettor linkages Lubricating and adjusting

    Technical Guides
    Carburettor linkages Lubricating and adjusting

    Lubricating and adjusting carburettor rod linkages Most older Cars with carburettors have rod linkages these have a ball-jointed head attached to the throttle valve lever, which ...

  • Carburettor stalls not idle

    Technical Guides
    Carburettor stalls not idle

    Carburettor Engines car will not idle or stalls easily. Problems with Carburettors when the Engine will not idle or stalls easily. Help Guide This is usually simply a matter of ...

  • Choke problems

    Technical Guides
    Choke problems

    When your car choke sticks or doesn't work When your Car is difficult to start in the morning or sometimes refuses to run properly when hot? Either way, a quick choke check could ...

  • Choke replace cable

    Technical Guides
    Choke replace cable

    Choke cable how to repair or replace. (1) Choke cable attachment on the carburettor. On older cars you vehicle may be fitted with a choke as most pre injection car came fitted ...

  • Exhaust manifold Checking hot-spot valve

    Technical Guides
    Exhaust manifold Checking hot-spot valve

    Checking the operation of the hot-spot valve Guide to checking the operation of the hot-spot valve between inlet and exhaust manifold on older cars. Some older car may have ...

  • Manifold vacuum

    Registered
    Technical Guides
    Manifold vacuum

    Manifold vacuum Manifold vacuum, or engine vacuum in an internal combustion engine is the difference in air pressure between the engine's intake manifold and Earth's atmosphere. ...

  • Reece Fish Carburettor

    Registered
    Technical Guides
    Reece Fish Carburettor

    Reece Fish Carburettor Manufacturer Leonard Reece & Co Production 1969–198? Engine A-series, 850–1275 cc I4 The Reece Fish carburettor (also known as the Reece-Fish carburettor) ...

  • Solex Carburetter

    Registered
    Technical Guides
    Solex Carburetter

    Solex Carburetter Solex was a French manufacturer of carburetors and the powered bicycle VéloSoleX. The Solex company was founded by Marcel Mennesson and Maurice Goudard to ...

  • Stromberg carburettor Auto choke Overhauling

    Technical Guides
    Stromberg carburettor Auto choke Overhauling

    Stromberg carburettor Auto water choke Overhauling Stromberg carburettor Automatic choke Overhauling (water type) guide. Note models may be different in side depending on age ...

  • Stromberg CD carburettor adjust choke

    Technical Guides
    Stromberg CD carburettor adjust choke

    Stromberg CD carburettor adjust the choke operation The choke cable on a Stromberg CD carburettor is connected to a cam lever which in turn, is attached at its centre to a ...

  • Stromberg CD carburettor Cleaning

    Registered
    Technical Guides
    Stromberg CD carburettor Cleaning

    Cleaning the Float bowl on a Stromberg CD carburettor The float chamber on a Stromberg CD carburettor is at the bottom. Remove the fuel line at the side of the carburettor body. ...

  • Stromberg CD carburettor Overhauling

    Technical Guides
    Stromberg CD carburettor Overhauling

    Overhauling a Stromberg CD carburettor The Stromberg CD range regulates the fuel flow by moving a tapered needle in and out of an adjustable jet. The needle is fixed to the base ...

  • SU carburettor checking choke operation

    Technical Guides
    SU carburettor checking choke operation

    How to Check and adjusting the choke operation on an SU carburettor Checking and adjusting the choke operation on an SU carburettor. The choke on an SU carburettor is operated by ...

  • SU carburettor clean float chamber

    Registered
    Technical Guides
    SU carburettor clean float chamber

    How to clean the float chamber bowl on an SU carburettor Cleaning the float chamber bowl on an SU carburettor Guide. Remove the fuel line from the top of the carburettor float ...

  • SU carburettor Overhauling variable-jet type

    Registered
    Technical Guides
    SU carburettor Overhauling variable-jet type

    Overhauling an SU variable-jet carburettor Overhauling the SU carburettor variable-jet type. The SU carburettor has a tapered needle that slides in an adjustable jet to increase ...

  • SU H Carbs Tuning Single & Multiple

    Registered
    Technical Guides
    SU H Carbs Tuning Single & Multiple

    SU H1 Carburettor Tuning Single & Multiple Single carburettor installations 1 Set the throttle adjusting screw. Warm up the engine to operating temperature, then switch Off. ...

  • SU H Carburettor How it Works

    Registered
    Technical Guides
    1950s
    SU H Carburettor How it Works

    SU H1 carburettor How it Works The SU H type carburettor how it works and operation For fist use to start the engine from cold, the external. facia-mounted mixture control ...

  • SU H Carburettor overhaul & rebuild

    Registered
    Technical Guides
    SU H Carburettor overhaul & rebuild

    SU H1 Carburettor Service overhaul and rebuild Here we explain how to overhaul and rebuild the early version SU H1 Carburettor . Disassembly 1 Clean the outside Of the ...

  • SU H Carburettor overview

    Technical Guides
    1950s
    SU H Carburettor overview

    Type H SU carburettor overview The Type H SU carburettor overview. The Type H carburettor is the earliest of the four Type H (Horizontal) types fitted as standard to many ...

  • SU H Float chamber explained

    Registered
    Technical Guides
    SU H Float chamber explained

    SU H1 Float chamber explained The SU H1 Float chamber and its operation. The float chamber assembly consists of the chamber, a detachable lid incorporating the inlet valve, and a ...

  • SU H Jet adjustment

    Registered
    Technical Guides
    SU H Jet adjustment

    SU H1 Carburettor Jet assembly Explained Jet assembly The jet assembly consists of the jet which slides in upper bearings and lower bearing Jet glands ,conical washers and ...

  • SU HD Carburettor Rebuild overhaul

    Registered
    Technical Guides
    SU HD Carburettor Rebuild overhaul

    SU Type HD Carburettor Rebuild and overhaul procedures How to service and overhaul the SU HD Carburettor Rebuild overhaul. Disassembly 1 Clean the outside of the carbu rettor ...

  • SU HD Carburettor Tuning

    Registered
    Technical Guides
    SU HD Carburettor Tuning

    SU Type HD Carburettor Single and Multiple Tuning Tuning the SU HD Carburettor Tuning for Single and Multiple Carburettor installations. Single carburettor installations 1 Set ...

  • SU HS Carb Rebuild overhaul

    Registered
    Technical Guides
    SU HS Carb Rebuild overhaul

    SU Type HS carburettor Rebuild overhaul The SU Type HS carburettor service Rebuild overhaul guide. Disassembly 1 Take Off the baffle plate from the vent pipe and thoroughly clean ...

  • SU Type HD Carburettor Jet

    Registered
    Technical Guides
    SU Type HD Carburettor Jet

    SU Type HD Carburettor Jet assembly The jet assembly consists of a brass jet tube, a flanged collar on which the jet actuating lever bears, a spring cup and a synthetic rubber ...

  • SU Type HD Design and identification.

    Technical Guides
    SU Type HD Design and identification.

    The SU Type HD Design, construction. parts and identification. The Type HD (Diaphragm-jet) carburettor was introduced after the original Type H version. It was manufactured now ...

  • SU Type HIF carb Auto start overhaul

    Registered
    Technical Guides
    SU Type HIF carb Auto start overhaul

    SU Type HIF carburettor Automatic starting overhaul SU Type HIF Automatic starting unit ASU FASD twin carburettors testing. removal, overhaul and refitting. Testing 1 Should it ...

  • SU Type HIF Carb Service overhaul

    Registered
    Technical Guides
    SU Type HIF Carb Service overhaul

    SU Type HIF carburettor Service overhaul procedures The SU Type HIF (Horizontal Integral Float Chamber) carburettor Service overhaul procedures. Disassembly 1 Thoroughly clean ...

  • SU Type HIF Carb Tuning

    Registered
    Technical Guides
    SU Type HIF Carb Tuning

    SU Type HIF (Horizontal Integral Float Chamber) carburettor Tuning Single carburettor installations 1 Set the throttle adjusting Screw. Run the engine to working temperature, ...

  • SU Type HIF carburettor explained

    Registered
    Technical Guides
    SU Type HIF carburettor explained

    SU Type HIF (Horizontal Integral Float Chamber) carburettor Here we explain the HIF (Horizontal Integral Float Chamber) SU changes, Operation and components. The Type HIF ...

  • SU Type HS Carb Tuning

    Registered
    Technical Guides
    SU Type HS Carb Tuning

    SU Type HS Carburettor Tuning The SU Type HS Carburettor Tuning guide. Single carburettor installations 1 Set the throttle adjusting Screw. Warm the engine up to normal Operating ...

  • SU Type HS carburettor

    Registered
    Technical Guides
    SU Type HS carburettor

    SU Type HS carburettor The Type HS carburettor was introduced in the late 1950s and came into widespread use in the early 1960s. It does not supersede Types H or HD, but was ...

  • Valve Needle

    Registered
    Technical Guides
    Valve Needle

    Needle Valve A needle valve is a type of valve having a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only ...

  • Velocity stack

    Registered
    Technical Guides
    Velocity stack

    Velocity stack explained A velocity stack is a trumpet-shaped device of differing lengths which is fitted to the air entry of an engine's intake system, carburetor or fuel ...

  • Weber Carburetter

    Registered
    Technical Guides
    Weber Carburetter

    Weber carburetors Industry Automotive industry Founded (1923 (1923)) Headquarters Italy Area served Worldwide Weber is an Italian company which produced carburetors; it is owned ...

  • Zenith 26V 30V Carburetters

    Registered
    Technical Guides
    Zenith 26V 30V Carburetters

    Zenith 26V AND 30V Series Carburetters Guide to the Zenith 26V AND 30V Series Carburetters. Working Features: The Series 26V and 30V updraught carburetter with horizontal air ...