2000s
Japan
Engines
Please select a module
Also read
Please select a module
Adjust Print share this page
Technical
  • Mitsubishi 4A9 engine Technical details and specifications (2004-)


    Engine code: 4A91 (1.5L)

    No. of cylinders 4/DOHC
    Capacity 1499cc
    Compression ratio 10,5:1
    Firing order 1-3-4-2
    Suitable for unleaded petrol Yes
    Ignition system Make Mitsubishi
    Fuel system Make Mitsubishi MFI-s
    Compression pressure 11,0-15,5 bar
    Oil pressure 2,9-6,9 bar @ 3500rpm
    Air metering Type Mass
    Fuel system pressure 3,2 bar
    Injector Ohm 14-15
    Radiator cap 0,74-1,03bar
    Thermostat opens 80-84°C

    © Motor car History

Service
  • Mitsubishi 4A9 engine Maintenance and Service Guide (2004-)

    Engine code: 4A91 (1.5L)

    Spark plugs Original equipment Bosch Type FR7NPP33
    Spark plugs Electrode gap 1,0-1,1mm
    Spark plugs Tighten 25±5 Nm
    Spark plugs Make Bosch Type FR7NPP33
    Valve clearance -INLET 0,18-0,26mm (check cold)
    Valve clearance -EXHAUST 0,26-0,34mm (check cold)
    Drive belt tension - alternator/PAS/AC 10,9-16,5mm
    Engine oil grade SAE 0W-30 or 0W-40
    Engine oil grade cold SAE 5W-30 5W-40, 5W-50
    Engine change with filter 4,2 litres
    Engine oil Sump drain bolt Tighten 39±5 Nm
    Manual transmission oil grade SAE 75W-90 Synthetic
    Manual transmission oil 1,8 litres
    Cooling system capacity 4,6 litres
    Brake fluid Type DOT 4

    © Motor car History 

Gallery
Has manual
Makes
Please select a module
Has Video

Mitsubishi 4A9 engine

 Mitsubishi 4A9 engine Maintenance (2004-)

The Mitsubishi 4A9 engine is a line of in-line 4-cylinder gasoline engines with 1.3L, 1.5L and 1.6L from Mitsubishi Motors. First installed in the Mitsubishi Colt in 2004.

History

The 4A9 project began as a joint effort between Mitsubishi Motors and Daimler Chrysler (now Daimler), with Mitsubishi Motors responsible for engine development. Manufactured at MDC Power GmbH in Germany, a Daimler subsidiary (formerly a joint venture with Mitsubishi Motors), it is now at Mitsubishi Motors Powertrain Factory in Kyoto. The model in Mercedes-Benz of 4A9 type is M135, 4A90 is M135 E13, 4A91 is M135 E15.

The 4A9 is the first Mitsubishi Motors in-line 4-engine series to adopt a high-pressure die-cast aluminium alloy cylinder block. In addition, it uses an aluminium alloy cylinder head, DOHC 4 valve structure and (intake side only) MIVEC variable valve mechanism the cylinder-head cover and intake manifold are made of plastic. In addition, the camshaft is driven by a timing chain instead of the conventional 4G1 type timing belt.

Variations 

4A90 (1.3L)

Mitsubishi 4A9 engine specifications (2004-)

  • Type: DOHC 16 valve MIVEC
  • Displacement: 1,332cc
  • Bore pitch: 83.0mm
  • Bore: 75.0mm
  • Stroke: 75.4mm
  • Maximum output: 70kW (95PS) / 6,000rpm
  • Maximum torque: 125N m (92 kg m) / 4,000 rpm

Installed vehicle

  • 2004-2012 Mitsubishi Colt, Colt Plus
  • 2004-2006 Smart Forfour
  • DFM Joyear X3
  • Zotye Z200
  • BAIC Up
  • Haima 2

4A91 (1.5L)

Mitsubishi 4A9 engine Technical details (2004-)

  • Type: DOHC 16 valve MIVEC
  • Displacement: 1,499cc 1.5 L 
  • Bore pitch: 83.0mm
  • Bore: 75.0mm
  • Stroke: 84.8mm
  • Compression ratio: 10.0:1
  • Maximum output: 80kW (109PS) 109 hp / 6,000rpm
  • Maximum Torque: 145N m (107 ft lb) / 4,000 rpm

Installed vehicle

  • 2004-2012 Mitsubishi Colt, Colt Plus
  • 2007-2015 Mitsubishi Lancer
  • 2004-2006 Smart Forfour
  • BAIC BJ20
  • Brilliance FSV
  • Brilliance V5
  • Haima 2
  • Soueast Motor V5
  • Soueast Motor V-cross (turbo spec)
  • Soueast Motor V3 (series Lancer)
  • Soueast DX3
  • Soueast DX7
  • Senova D20
  • Senova D50
  • Senova X55
  • Mitsubishi Xpander
  • Nissan Livina
  • Yema T70 SUV
  • Zotye Z300
  • Zotye SR7

The Smart Forfour 1.5 Sports Style (limited to 500 units, not yet introduced in Japan) was equipped with an engine tuned by Brabus. At the same time, an SB3 kit that tunes the existing 1.5 engine to similar specifications was also sold. The main contents are changes in the camshaft and ECU, and the output is as follows.

  • Maximum output: 90kW (122PS) / 6,250rpm
  • Maximum Torque: 160N m / 3,800rpm

4A92 (1.6L)

Mitsubishi 4A9 engine Service Guide (2004-)

  • Type: DOHC 16 valve MIVEC
  • Displacement: 1,590cc 1.6L
  • Bore: 75.0mm
  • Stroke: 90.0mm
  • Compression ratio: 11.0:1
  • Maximum output: 86kW (117PS) 115 hp / 6,000rpm
  • Maximum Torque: 154N m (114 ft lbf) / 4,000 rpm

Installed vehicle

  • 2010- Mitsubishi ASX
  • 2011 -Mitsubishi Lancer (European spec)
  • Brilliance H530
  • Brilliance V5
  • DFM Joyear X3