2000s
Japan
Engines
Please select a module
Also read
Please select a module
Adjust Print share this page
Technical
  • Mitsubishi 3A9 engine Technical details and specifications (2003-)

     

    Engine Type 3A91 Capacity 1124 cc

    No. of cylinders 3/DOHC
    Capacity 1124 cc
    Compression ratio 10,5:1
    Type: DOHC 12 valve
    Bore: 75.0mm
    Stroke: 84.8mm
    Bore pitch: 83.0mm
    Firing order 1-3-2
    Suitable for unleaded petrol Yes
    Ignition system Map-DIS
    Trigger location Cam/ Crankshaft
    Fuel System MFI-s Combined ignition and fuel ECM Yes
    Air metering Type Mass
    Oil pressure 2,9-6,9 bar @ 3500 rpm
    Fuel system pressure with vacuum 3,2 bar
    Engine coolant temperature 80 °C
    Thermostat opens 82±2 °C
    Injector 14-15 Ohm
    Maximum cranking amps 113-139A

    © Motor car History

Service
  • Mitsubishi 3A9 engine Maintenance and Service Guide (2003-)

    Engine Type 3A91 Capacity 1124 cc
     
    Spark plugs Original equipment Bosch Type FR7NPP33
    Spark plugs Electrode gap 1,0-1,1mm
    Spark plugs Tighten 20-30 Nm
    Valve clearance -INLET 0,18-0,26mm check cold
    Valve clearance -EXHAUST 0,26-0,34mm check cold
    Engine oil grade - normal/moderate climate 15W/40 SAE or 10W/40 SAE
    Engine oil grade - cold climate 5W/30 SAE
    Engine oil grade - hot climate 20W/50 SAE
    Engine oil chnge with filter 3,2 litres
    Engine oil Sump drain bolt Tighten 34-44 Nm
    Cooling system 4,2 litres
    Air conditioning refrigerant type R134a
    Air conditioning refrigerant quantity 430±20 grams
    Air conditioning oil Type Dens Oil 8
    Air conditioning oil quantity 100 cm³
    Air conditioning oil viscosity 46 ISO

     
    Cylinder head Tightening torques (Renew bolts Yes)
    Stage 1 Tighten 15 Nm
    Stage 2 Tighten 25 Nm
    Stage 3 Tighten 180°

    © Motor car History

Gallery
Has manual
Makes
Please select a module
Has Video

Mitsubishi 3A9 engine 

Mitsubishi 3A9 engine (2003-)

 Mitsubishi 3A9 engine, this is a in-line 3-cylinder gasoline engines from Mitsubishi Motors from 2003 on .

History

The Mitsubishi 3A9 engine is a small in-line 3-cylinder petrol engine with Displacement of 1.0L ,1.1L and 1.2L built from 2003 on. Fitted depending on location in the Mitsubishi Mirage, Colt, Attrage and also the Mercedes Smart Forfour.

Developed in 2003 at the same time as the 4A9, the 3A91 type was first installed in the European specification Colt this was the only variation until 2011. 

From 2012, the 3A90 and 3A92 will be installed on the Mirage. The technical characteristics are almost the same as the 4A9, but MIVEC is not adopted except for the 3A90 and 3A92 for the 6th generation Mirage. Previously, like the 4A9, it was manufactured by Daimler 's subsidiary MDC Power GmbH in Germany, but now it is manufactured at the Powertrain Factory in Kyoto City. The engine type in Mercedes-Benz of the 3A91 type is M134.

3A90 MIVEC is a phase change type (intake side only). The intake closing timing at the most retarded MIVEC is set to some extent late, and the late closing reduces pumping loss and operates in a manner similar to a late closing mirror cycle at light loads, contributing to improved fuel efficiency.

Mitsubishi 3A9 engine Variations Technical details and specifications

Mitsubishi 3A91  engine (2003-) Technical details and specifications

3A91 (2003 to 2007)

  • Type: DOHC 12 valve
  • Fuel type - Petrol (gasoline)
  • 3-cylinder
  • Firing order 1-3-2
  • Displacement: 1,124cc
  • Bore pitch: 83.0mm
  • Bore: 75.0mm
  • Stroke: 84.8mm
  • Compression ratio: 10.5:1
  • Air metering Type Mass
  • Maximum output: 55kW (75PS) / 6,000rpm
  • Maximum torque: 100N m (73 ft lbf) / 3,500 rpm

Installed vehicle

  • 2003 -Mitsubishi Colt (European spec)
  • 2004-2006 Smart Forfour

Mitsubishi 3A90  engine Technical details and specifications

3A90 (2012-)

  • Type: DOHC 12 valve MIVEC
  • Fuel type - Petrol (gasoline)
  • 3-cylinder
  • Firing order 1-3-2
  • Displacement: 999cc
  • Bore pitch: 83.0mm
  • Bore: 75.0mm
  • Stroke: 75.4mm
  • Compression ratio: 10.5:1
  • Air metering Type Mass
  • Maximum output: 51kW (69PS) / 6,000rpm
  • Maximum torque: 86N m (8.8 kgf m) / 5,000 rpm

Installed vehicle

  • 2012 -Mitsubishi Mirage (6th generation)

Mitsubishi 3A92 engine Technical details and specifications(2003-)

3A92 (2012-)

  • Type: DOHC 12 valve MIVEC
  • Fuel type - Petrol (gasoline)
  • 3-cylinder
  • Firing order 1-3-2
  • Displacement: 1,193cc
  • Bore pitch: 83.0mm
  • Bore: 75.0mm
  • Stroke: 90mm
  • Compression ratio: 10.5:1
  • Air metering Type Mass
  • Maximum output: 57kW (78PS) / 6,000rpm
  • Maximum torque: 100N m (73 ft lbf) / 4,000 rpm

Installed vehicle

  • 2012- Mitsubishi Mirage (Overseas specifications)
  • 2013 -Mitsubishi Attrage (Thai spec) 
  • 2014 -Mitsubishi Mirage G4 (Philippine spec), Mitsubishi Mirage (Japan spec/1.2G)