Elva GT 160 BMW
![]() | |
Production period: | 1964 |
Class : | sports car |
Body versions : | Coupe |
Engines: | Gasoline BMW 1991 cc |
power: | 182 hp |
Wheelbase : | 78 in, 1,981 mm |
Overall length: : | 150 in, 3,810 mm |
Overall height: | 42 in, 1,067 mm |
The Elva GT 160 was a prototype sports car from the 1960s
History
In 1964 there was the Coupe GT 160 , of which only three vehicles were manufactured. It had a four-cylinder water cooled engine from BMW with 1991 cc a dry sump unit with oil cooler and 2 Weber 45 DCOE horizontal twin barrel carburettors, which made 185 hp at 7200 / min and was installed as a mid-engine ,the max Speed was 160 mph, 257.6 km/h .The un-synchronized five-speed gearbox should be available with different ratios with a single dry plate clutch, as well as optionally a self-locking differential .
PERFORMANCE
- Engine Capacity 121.49 cu in, 1,991 cu cm
- Fuel Consumption 16 m/imp gal, 13.4 mlUS gal, 17.6 1 x 100 km
- Max Speed 160 mph, 257.6 km/h
- Max power (SAE): 185 hp at 7,200 rpm
- Max torque (SAE): 140 1b ft, 19.3 kg m at 6,800 rpm
- Max number of engine rpm: 8,000
- Specific power: 92.9 hp l
- Max speeds: 160 mph, 257.6 km/h In 5th gear
- Power-weight ratio; 6.4 lb/hp, 2.9 kg l hp
The car had a tubular trellis frame chassis with aluminium bodywork, distribution of the cars weight was 40% to front axle, and 60% at rear axle and low ground clearance of 4.50 in, (114 mm). The wheels were hung independent front double wishbones, rear independent, wishbones, twin trailing radius arms and disc brakes with andiameter of 10 in, (254 mm). The empty weight (ready to drive) was given as 428 kg.
Because of the engine, the model was also called Elva-BMW .Only three prototypes were produced.
Description
Technical
-
Elva GT 160 Technical details and specifications (1964)
ENGINE
location rear, 4 stroke
cylinders: 4, in line
bore and stroke: 3.50 x 3.19 in, 89 x 81 mm
engine capacity: 121.49 cu in, 1,991 cu cm
compression ratio: 10.5
cylinder block: cast iron
cylinder head: light alloy
crankshaft bearings: 5
valves: 2 per cylinder, overhead, Vee-slanted. rockers
camshafts: 1. overhead
lubrication: gear pump, full flow filter, dry sump, oil cooler
carburation: 2 Weber 45 DCOE horizontal twin barrel carburettors
fuel feed: electric pump
cooling system: waterTRANSMISSION
driving wheels: rear
clutch: single dry plate
gearbox: mechanical
gears: 5 + reverse
synchromesh gears: none
gear lever location: central
final drive: spiral bevel.CHASSIS
type tubular trellis frame
front suspension: independent, wishbones, coil springs, telescopic dampers
rear suspension: independent, wishbones, twin trailing radius arms, telescopic dampers.STEERING
rack-and-pinion.
turning circle (between walls): 42 ft, 12.8 mBRAKES
disc (diameter 10 in, 254 mm).ELECTRICAL EQUIPMENT
voltage: 12 V
battery: 24 Ah
alternator; ignition distributor: BoschDIMENSIONS AND WEIGHT
wheel base: 78 in, 1,981 mm
front track: 42.50 in, 1,079 mm
rear track: 42.50 in, 1,079 mm
overall length: 150 in, 3,810 mm
overall width: 60 in, 1,524 mm
overall height: 42 in, 1,067 mm
ground clearance: 4.50 in, 114 mm
dry weight: 1,200 1b, 544 kg
distribution of weight: 40% front axle, 60% rear axle© Motor car History
-
Elva GT 160 maintenance and Service Guide (1964)
Fuel type: 100 oct petrol
Engine oil: 16 imp pt 19.24 US pt, 9.1 1, SAE 40, change every 2,000 miles, 3,200 Km
Cooling system capacity: 16 imp pt, 19.24 US pt
Tappet clearances: inlet 0.008 in, 0.20 mm, exhaust 0.008 In, 0.20 mm
Tyre pressure (medium load): front 32 psi, 2.2 atm, roar 32 psi, 2.2 atm
Tyres: 5.00 x 13 front, 6.00 x 13 rear
Fuel tank capacity: 16 imp gal, 19.3 US gal
Carrying capacity: 353 lb. 160 kg,© Motor car History