G-Force Sports Cars

G-Force Sports Cars is an Australian manufacturer of automobiles .
History
The company was originally based in Kardinya . in 1990 began production of cars and kit cars . The brand name is G-Force . Meanwhile, the company is located in Perth .
The offer includes replicas of the AC Cobra . Initially, the vehicles were based on a ladder frame and later on a tubular frame. The suspension came initially from Jaguar Cars . Various V8 engines up to 7000 cc displacement drive the vehicles.
Specs. from there website: http://www.gforcesportscars.com.au
PERFORMANCE | 0 to 100Kms 4-5 secs depending on motor. 160Kms 12-14 secs depending on motor. Standing ¼ mile 12-14 secs depending on motor. |
HANDLING | Our 427SC can generate 1.0G (lateral) using 17", 18” low profile tyres. Fully adjustable coilovers which are optional, gives personal handling capabilities for height and dampening. |
DIMENSIONS | Weight 302 Ford 1200 kilos. Weight distribution F/48 R/52. Wheel base 90”. Track Front/Rear 56”/56”. Length overall 156”. Height to top of windscreen 45”. Width 70”. Ground clearance 4”. Fuel capacity 65 litres – 80 litres. |
DRIVE TRAIN | Optional motors: Ford 302/351 V8 Windsor. Ford 290 5.4 litre Boss Quad Cam. Ford Coyotee 5 litre Quad Cam. Ford 429/460 Cobra Jet. Chevy LS1, LS2, LS3 motors. Chevy LS7, 427, LS9 etc. |
TRANSMISSIONS | Ford T5, Tremec 5 speed TKOI, TKOII. Tremec TR 60/60 6 speed. Tremec T56 6 speed. Supra 5 speed Toyota. |
DIFF | Salisbury ratios 2.88-4.01. Optional limited slip diff. |
BRAKES | Front 11.0” vented disc. 12”, 13” optional. Rear 10.0” solid inboard. 11”, 12” optional vented outboard . |
HYDRAULICS | Booster master cylinder – Ford. This meets ADR’s and can be upgraded for competition. |
FRONT SUSPENSION | Independent with parallel unequal length wishbones coil over shock absorbers anti roll sway bar. |
REAR SUSPENSION | Differential mounted direct to chassis through top of diff and bottom through wishbone mounting pins. This is independent w/lower wishbones, half shaft uppers, radius arms for strength and longevity of suspension optional rear any roll sway bar. |
STEERING | Rack & pinion 3.3 turns lock to lock bump steer is virtually nothing. |
WHEELS | Options 15” diameter F/8” R/10”. 17” diameter F/8” R/11”. 18” Diameter F/8” R/11”. |
TYRES | Options – 15” diameter F235x60x15” – R295x50x15”. 17” diameter F245x45x17” – R315x35x17”. 18” diameter F255x40x18” – R315x30x18”. |
CHASSIS | MK III KIT (1) G-Force platform ladder backbone design incorporates every mounting point needed all jigged in place. Torsional and beaming over 6,000nm per degree meets VSB14 Bulletin and all State requirements. MK III KIT (2) G-Force space frame design incorporates three engineering designs, which tie up front and rear bulkhead zones where suspension is housed. This gives superior torsional rigidity for high output motors. MK III KIT (3) Coyotee is similar to KIT (1). |
BODY | Finished in white gel coat , mediums available chopped strand matt, chop strand core matt, carbon, Kevlar woven cloth, aluminium with birdcage tube support as per original. Resin is a DCPD low shrinkage - .03percent. This will post cure by itself, not like vinylester resin which needs curing in the mould for 6 hours at 60 degrees. All internal fittings boot pan, inner guards, floor pan are bonded to body to form a simple monologue design. The body is mounted at 36 points and can be removed at any time. The quality of the body is as good as it gets. Often we have a finished car in white gel coat polished to show the quality. However we do recommend painting the body. |
More information on
G-Force Sports Cars
Australian Automotive manufacturer Perth, Australia From 1990 to today
Australian Automotive manufacturer Perth, Australia From 1990 to today
Related
Categories