Mazda Carol Autozam Range timeline

  From 1989

 Mazda Carol Autozam Mk 1 1989-1990

With the revival of the Kei class in the late eighties, Mazda revived the Carol name for its 1989 Autozam Carol. The recently introduced Autozam was to be Mazda's youthful brand and was used on Mazda's kei cars for some time. The Carol was produced for Mazda by Suzuki, and while it used the Suzuki Alto's platform and mechanicals, its interior and boldly curved exterior were largely unique. Its round headlights and cute appearance were very much a product of its time and followed upon the heels of similar designs such as Nissan's Be-1 and Pao. It was either front (AA5PA) or all-wheel drive (AA5RA) and its SOHC 547 cc 3-cylinder Suzuki F5B engine produced 40 PS (29 kW) at 7,500 rpm. The Carol had a 2,335 mm (92 in) wheelbase for a total length of 3,190 mm (126 in) and was 1,295 mm (51 in) wide. Brakes were discs up front and drums in rear.

Equipment levels were e, f (also 4WD), and the top g version. The g featured a Canvas Top. Four-wheel drives received a five-speed gearbox, while the front-wheel drive versions received a four- or five-speed manual or a three-speed auto. 550 cc Carols are rare, as production ended after only five months. New Kei car regulations for 1990 allowed manufacturers a bigger engine and an extra 10 cm of body length, and Mazda quickly brought out an updated Carol.

New regulations brought about the replacement of the 1989 Carol within 4 months. The new car was 6 cm longer and used a larger 657 cc Suzuki F6A engine with 52 PS (38 kW). The car is easy to tell from its predecessor by its clear headlight covers. In 1991, Mazda offered a 61 PS (45 kW) turbocharged engine, and the car was lengthened to 329 cm in 1992.

 An updated Autozam Carol came out in October 1995 as a 1996 model. Again, it was front or all-wheel drive and still riding on the same platform. 

 An entirely new Carol appeared in October 1998 as a 1999 model, this time with the Mazda brand name. Unlike previous Carols, this model was similar to the Suzuki Alto. This Carol was available with either front or all-wheel drive and used the old 657 cc F6A engine or a new 658 cc DOHC unit. It was closely related to the AZ-Offroad and AZ-Wagon introduced at the same time. 

  The Carol was updated with a new look for 2001. Emissions (with a new VVT engine) and safety were also improved.

  As Suzuki released a replacement for the Suzuki Alto, the rebadged Mazda Carol was also replaced.

 For 2010, Mazda has launched a new Carol, which was first revealed at the 2009 Tokyo Motor Show. The Carol has been updated alongside its sister, the Suzuki Alto. Like the Alto, the Carol is available with AWD and CVT.