The Motor Car History website helpful hints on maintaining your car, for classic & modern cars.
Replace Rear Brake Pads and Rotors (disks) How to replace rear disks and pads.Rear disc brake pads offer better performance and are not as affected by moisture like conventional brake shoe style brak ...
How to Replace Front Brake Pads and Rotors (Disks) The front brake pads androtors are normal service items on most cars Besides removing the front wheels and visually inspecting the brake pad lining ...
Replacing rear car brake shoes Most older cars have a brake shoe and drum style of brake system in the rear of the cars.Drum brakes are not quite as efficient as their counter part the disc brake sys ...
How to Replace a Brake Wheel Cylinder A wheel cylinder is an important braking component. Its purpose is to hydraulically expand brake shoes causing them to tighten against a brake drum. Thus, they a ...
Buick Wheel Fitment Sizes Guide PCD & Offsets Model P.C.D. ET C.B. Buick Century (From 1986) 5 x 115 38 70 Buick Park Ave (From 1989) 5 x 115 38 70 Buick Regal (1987...1994) 5 x 115 38 70 Buick Rivie ...
Car Bump steer explained Bump steer or roll steer is the term for the tendency of the wheel of a car to steer as it moves upwards. It is typically measured in degrees of steer per metre of upwards mo ...
Car Bundorf analysis explained A Bundorf analysis is a way of describing the characteristics of a vehicle that govern its understeer balance. The understeer is measured in units of degrees of additio ...
Cadillac Wheel Fitment Sizes Guide PCD & Offsets Model P.C.D. ET C.B. Cadillac Alante (1987...1994) 5 x 115 38 70 Cadillac De Ville (From 1989) 5 x 115 38 70 Cadillac Eldorado (From 1989) 5 x 115 38 ...
Car Abbreviations & Acronyms Explained Car jargon buster what does that stand for? # to G 4WD: Four Wheel Drive ABS: Anti-lock Braking System AC: Air Conditioning ACC: Adaptive Cruise Control ACM: Au ...
Car Bulbs types and checks How to remove a Car Bulb Remove the bulb and look at it against the sky you may be able to see whether the filament has broken. If you cannot tell, test it with a length of ...
